Drip edges
A hemmed drip edge on the skirt kicks water away from the siding and reduce staining.
Chimney Parts
Chase Cover Replacement Beachwood, NJ
The chase cover on a Beachwood home with a factory-built fireplace can be swapped for one that sheds water before rust and standing water cause leaks into the chase and fireplace. Dial (732) 966-9204 to talk with a local chimney pro about your chase.
A chase is the boxed enclosure on the outside of a house that hides a factory-built chimney pipe, usually framed in wood and finished with siding or stone veneer. The chase cover, sometimes called a chase top or chase pan, is the metal sheet that caps the top of that enclosure. Its job is to keep water out of the framing and away from the fireplace below.
Many chase covers installed by builders are made of galvanized steel, and they are often flat. Water pools on a flat galvanized top until rust sets in, and then it leaks. Rust running down the chase is usually the first clue.
Water that gets past the cover can do real damage inside the chase. It can rot the wood framing and sheathing, soak insulation, rust the metal fireplace and flue pipe and leave stains on ceilings or walls near the fireplace. Replacing the cover early is far easier than repairing a rotted chase.
Many chase cover replacement calls in Beachwood also turn up a need for chimney cap installation or chimney leak repair.
Looking for Beachwood chase cover replacement? Call (732) 966-9204 to reach a nearby chimney sweep.
Call nowThe process
The chase cover replacement process
Here is how a sweep usually handles a chase cover replacement.
Inspect the chase
The condition of the cover, collar and chase top is checked. Soft wood under the cover is a sign of a longer leak.
Size the cover
Exact measurements are taken so the new cover fits snugly. Covers are usually custom fabricated to fit.
Pull the cap
The cap and old cover are removed carefully so the flue pipe is not disturbed. Any damage underneath can then be seen.
Fit the new top
The new cover is set in place with its skirt over the siding and a hem that kicks water off the edge. Screws go through the sides so the top stays watertight.
Reinstall the cap
The cap is reinstalled and the collar sealed with high temperature sealant. A final look confirms the cover is secure.
What is included
Chase cover options
Chimney caps
The collar around the flue pipe is sealed, and the cap is replaced if it is worn so water cannot run down the flue pipe.
Stainless covers
Stainless steel covers resist rust far better than galvanized steel and do not leave rust streaks.
Copper chase covers
Copper covers last a long time and develop a patina over time that pairs well with copper flashing.
Sloped tops
Covers are made with a slope, cross break or raised center so water runs off which is the main fix for flat pans.
Related service
Chimney Chase Repair Beachwood, NJ
When a chase cover has leaked for a while, the chase itself often needs repair too. Common repairs include replacing rotted framing and sheathing, fixing or replacing siding, resealing trim and replacing wet insulation. Leaks can come from the roof line as well, so the flashing gets a look.
Calling (732) 966-9204 from Beachwood with details about stains or leaks helps the sweep plan the visit. Bigger framing repairs may involve a carpenter, while the cover and cap are handled by the sweep. Rot under the cover needs attention before the new cover goes on.
Local help
Chase Cover Replacement Near Me
Chase covers in Beachwood face every kind of weather the year brings, from summer storms to winter snow. Homes in Beachwood and nearby towns such as South Toms River, Holiday City South, Toms River and Pine Lake Park often have chase covers that were installed when the house was built and never replaced, which is why a chase cover is worth checking when the chimney is swept.
For chase cover replacement in Beachwood, NJ or nearby towns like South Toms River, Holiday City South, Toms River and Pine Lake Park, call (732) 966-9204 to reach a chimney sweep who covers your street.
Chimneys in this climate
Cold winters keep fireplaces, wood stoves and oil burners working for half the year or more. The hardest thing on brick here is not the cold itself but the constant swing above and below freezing: water soaks into brick, mortar joints and the crown on a mild day, freezes overnight and expands, which is how cracks, loose bricks and leaks start. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Beachwood, NJ schedule a sweep in early fall, and a repair check after a hard winter.
Why call
Why act early
Safer fires
A chimney problem fixed early rarely spreads to the masonry, the liner or the house.
Local knowledge
Chimney sweeps in Beachwood know the chimneys and fireplaces common in local homes.
Know what happens next
Ask the sweep about the cause, the options and the estimate before work starts.
Chase Cover Replacement questions
What is a chase cover?
The chase cover is the metal sheet that seals the top of a chimney chase, with an opening for the flue pipe. Its job is to keep water out of the framing, insulation and fireplace. A cap sits on top of the flue pipe that comes through the cover.
Why is there water in my prefab fireplace?
A failed chase cover is one of the most common causes of water in a factory-built fireplace. That can rust the firebox, damage refractory panels and soak the area around the fireplace. The sweep will check the cover, collar and cap to find the source.
Should I patch or replace my chase cover?
Patching a rusted chase cover is usually a short term fix. Most sweeps recommend replacement once rust has set in. Any rot underneath should be repaired at the same time.
Why are there rust streaks on my chimney siding?
Many original chase covers are made of galvanized steel, which rusts once its protective coating wears away. Water pooling on a flat cover speeds up corrosion. That rust washes down and stains the siding below.
How long does a stainless steel chase cover last?
A stainless steel or copper chase cover can last for decades. Shape matters as much as material, since a sloped top sheds water. A yearly look at the chase top is a good habit.
More questions? Call (732) 966-9204
Related services
Chimney Cap Installation
Putting a sturdy cap on top of the chimney sized to the flue tile or the whole crown.
Learn moreChimney Leak Repair
Stopping chimney leaks at the source, whether the drip shows up in the attic, the ceiling or the firebox.
Learn moreChimney Waterproofing
Treating chimney brick and mortar with a breathable water repellent, applied after repairs so the brick sheds water but can still dry out.
Learn moreChimney Repair
Repairs for the masonry, crown, flashing and flue of a damaged chimney, so the chimney stays dry and safe to use.
Learn more
Looking for something else?
See all chimney servicesTalk to a Beachwood chimney sweep about chase cover replacement
Call now for Beachwood chase cover replacement and help in the towns around it.
(732) 966-9204
Free to call. No forms to fill out.